null

XSONIC AIRMAR B275LH-W Depth/Temperature Transducer

(No reviews yet) Write a Review
$2,349.00
SKU:
165762
ZIP PAY
Zip Available
Xsonic Airmar B275LH CHIRP Transducer

The B275LH-W is a bronze, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels 8 m (25 ft) and up. This dual-channel transducer combines Low CHIRP frequencies to accurately track the bottom in deep water, with High CHIRP at a constant 25° beam width for the best resolution and coverage in the upper water column and in shallower depths. 

Features

  • 42-65 kHz Low CHIRP with 25-16° beam width
  • 150-250 kHz High CHIRP with wide 25° beam for excellent fish targets
  • Up to 1200 m (4000 ft) range with Low CHIRP
  • 8 internal broadband ceramics
  • Thru-Hull with bronze housing and high-performance fairing
  • Suitable for fiberglass, wood and metal hulls
  • Ideal for sportfishing and commercial vessels 8 m (25 ft) and up
  • Recommended for use with the BSM-3 broadband sounder module

Compatibility

Airmar XSONIC Transducers come with the new 9-Pin Black XSONIC connector. This transducer is compatible with Lowrance HDS Gen3, HDS Carbon and Elite-7 ti models. No need to mix, match or splice. Just plug and go!

Dual Channel CHIRP

Using pulsed transmissions swept across a range of frequencies, CHIRP technology delivers target resolution and depth penetration superior to traditional single-frequency sonar. This dual-channel CHIRP transducer operates in the 42-65 kHz Low CHIRP frequency range with a 25-16° beam width, and the 150-250 kHz High CHIRP frequency range with a 25° beam width. With Low CHIRP, the B275LH-W provides an operating depth of up to 1200 m (4000 ft).

Wide Angle CHIRP

Ideal for anglers, the B275LH-W’s wide-angle technology delivers a constant 25° beam width across the transducer’s 150-250 kHz High CHIRP frequency range. This achieves up to double the coverage beneath your boat, and provides enhanced fish detection in the upper water column, versus the narrower beam of other high-frequency CHIRP transducers.

Depth/Temperature

One sensor does it all. Able to measure both depth and temperature in a single package, the B275LH-W simplifies installation and requires just one connection to your echosounder module or multifunction display.

Mounting

With bronze housing, the B275LH-W is suitable for thru-hull mounting in fiberglass, wood and metal hulls. Thru-hull mounting places the transducer in the water on the outside of your boat’s hull; a hole must be drilled for installation, and a fairing block is required to ensure proper alignment. This typically offers the best depth measurement and fishfinding performance.