40PSI - 13LPM - 12 Volt - Including Filter and Accumulator Tank
Fully assembled, wired and plumbed ready for use - simplifies installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute flow which will serve 3 or more 13mm (1/2") outlets in standard installations.
Fully mounted pump system provides up to 13.2 litres per minute flow.
Diaphragm pump design gives smooth and quiet operation and dry run ability
Self primes to 3 metres. Can be installed vertically or horizontally
Thermal overload protection with auto re-start. Ignition protected
Pressure switch cuts in at 20PSI - cuts out at 40PSI
- 1 x Par-Max 3.5 diaphragm pressure pump
- 1 litre pressurized bladder accumulator tank
- Pre-wired, plumbed and mounted on a sturdy plastic mounting board (322 x 328mm) with rubber feet.
- Simple one-step electrical connection
- Includes snap-in ports for connection to 12mm (1/2") I.D hose.